Perforating systems

Single-use shaped charge perforating systems KPO73, KPO89, KPO102, KPO114 are intended for perforating and explosion works in oil, gas and other wells under high and low hydrostatic pressure and temperature up to 170°C.

Repeated use shaped-charge perforating systems KPM95, KPM105 are intended for perforating and explosion works in cased wells filled with water, oil or other flushing fluids under high and low hydrostatic pressure and temperature up to 150 °C.

Small shaped-charge perforating systems with collapsing body KPR (“Link” type) are intended for perforation of casing, tubing and drill strings with minimal drift diameter of 50 mm and 62 mm accordingly in wells filled with liquids or gas condensate, when coiled tubing is lowered and well head sealed.

Small shaped-charge perforating systems with retrievable belt frame KPL (“Strip” type) are intended for perforation of casing, tubing and drill strings with minimal drift diameter of 50 mm and 62 mm accordingly in wells filled with liquids or gas condensate, when coiled tubing is lowered and well head sealed.

Shaped-charge frameless perforating system PSK52 is used for well completion in oil, gas and other wells fixed with casing pipe when coiled tubing is lowered and well head sealed.

Frameless shaped-charge perforating system with retrievable belt structure PKSUL80 is intended for oil, gas and water well perforation with hydrostatic pressure 2.5 - 120 MPa and temperature up to 150 °С